DYMEC DYM-C37 Ethernet RJ-45 to Serial (RS-232 / 422 / 485) Data Link for Sub-stations and Electrical Switch Gear
DYMEC SERIAL LINK
DYMEC C37 - Ethernet to SERIAL Data Links
(RS-232 / 422 / 485) TO 10Base T - RJ45
DYMEC C37 Ethernet to Serial Converter (DYMEC Serial Link(
The DYMEC C37 Ethernet to Serial (RS 232 / RS 422 / RS 485) Converter is an industrial-grade, isolated and surge-protected Multi-Mode fiber converter. This serial converter allows RS 232 / RS 422 / RS 485 signals to be converted directly to 10/100Base T. By using Ethernet technology the DYMEC C37 Ethernet to Serial Converter provides a noise-immune, electrically isolated and error free data transmission environment. The converter is also DIN rail mountable. Used in Power Switch Gear and Sub-station Applications.
DYMEC C37 Ethernet to Serial Converter Hardware Features:
-
- Power Input Voltage: +10 ~ +30 Volts DC.
- Interface: RS-232/422/485 auto switching to Ethernet 10/100Base-T.
- RS-232: 3 full-duplex (TXD, RXD, GND).
- RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , and RX-).
- RS-485: Differential 2 half-duplex wires (D+, D-).
- Cable: Cat 5 or 6 Copper
- Distance: RS-422/485 up to 4000 ft . ( 1250 Meters), and Fiber up to 2 KM .
- Baud Rate: From 300 bps to 115.2 kbps (maximum)
- Connection type: Screw terminal for maximum AWG 12 wire.
- Signal LED: Power on, TX, RX.
- Power supply: Screw terminal, or standard external DC adapter.
- Power consumption: 1.6 Watts.
- Isolation Voltage: 15KV Volts DC.
- Operating temperature:-40 to +85℃.
- Storage temperature: -40 to +85℃.
- Humidity: 10-97%0 non-condensing.
- Dimension: 151 mm X 75 mm X 26 mm .
- Weight: 400 g
- Limited Lifetime Warranty.
. RJ45 10/100Base-T port connector.
. Supports 3,000 Volts DC isolation protection.(Built-in)
. All RS-422 / RS-485 signals are protected by both surge and over current protection.
. Power / TX / RX mode LED indicator.
. Fiber transmission distance up to 2 km.
. DIN rail and panel mount support.
Fiber Converter Software Features:
- . Auto directional flow control on RS-485.
. Automatically switch signaling RS-232, RS-422 and RS-485.
. Automatic baud rate switching from 300 baud to 115.2 Kbps. - Replaces Garrettcom - DYMEC 3350 Converters
The DYME C37 Ethernet to Serial Converter Package Includes:
DYMEC C37 Ethernet to RS 232 / RS 422 / RS 485 Converter.
REPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol, Ruggedcom, Belden, cisco
