Menu
Cart 0

DYMEC C-37 Ethernet RJ-45 to Serial (RS-232 / 422 / 485) Data Link for Sub-stations and Electrical Switch Gear

  • $749.00
  • Save $546


DYMEC SERIAL LINK

DYMEC C37 - Ethernet to SERIAL Data Links

(RS-232 / 422 / 485) TO 10Base T - RJ45

Isolated and surge protected Ethernet to RS 232, RS 422 & RS 485 Serial Converter. The converter supports serial baud rates up to 115 Kb/s.
Class 1 Division 2, Military Grade. 
Power Utility Product
KYLAND, GARRETTCOM, KYLAND Technology, KYLANS-USA
Description:

DYMEC C37 Ethernet to Serial Converter (DYMEC Serial Link(

The DYMEC C37 Ethernet to Serial (RS 232 / RS 422 / RS 485) Converter is an industrial-grade, isolated and surge-protected Multi-Mode fiber converter.  This serial converter allows RS 232 / RS 422 / RS 485 signals to be converted directly to 10/100Base T. By using Ethernet technology the DYMEC C37 Ethernet to Serial Converter provides a noise-immune, electrically isolated and error free data transmission environment.  The converter is also DIN rail mountable. Used in Power Switch Gear and Sub-station Applications.

DYMEC C37 Ethernet to Serial Converter Hardware Features:

  • Power Input Voltage: +10 ~ +30 Volts DC.
  • Interface: RS-232/422/485 auto switching to Ethernet 10/100Base-T.
  • RS-232: 3 full-duplex (TXD, RXD, GND).
  • RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , and RX-).
  • RS-485: Differential 2 half-duplex wires (D+, D-).
  • Cable: Cat 5 or 6 Copper
  • Distance: RS-422/485 up to 4000 ft . ( 1250 Meters), and Fiber up to 2 KM .
  • Baud Rate: From 300 bps to 115.2 kbps (maximum)
  • Connection type: Screw terminal for maximum AWG 12 wire.
  • Signal LED: Power on, TX, RX.
  • Power supply: Screw terminal, or standard external DC adapter.
  • Power consumption: 1.6 Watts.
  • Isolation Voltage: 15KV Volts DC.
  • Operating temperature:-40 to +85℃.
  • Storage temperature: -40 to +85℃.
  • Humidity: 10-97%0 non-condensing.
  • Dimension: 151 mm X 75 mm X 26 mm .
  • Weight: 400 g
  • Limited Lifetime Warranty.
Wide range power input voltage.(+10 ~ +30 Volts DC)
. RJ45 10/100Base-T port connector.
. Supports 3,000 Volts DC isolation protection.(Built-in)
. All RS-422 / RS-485 signals are protected by both  surge and over current protection.
. Power / TX / RX mode LED indicator.
. Fiber transmission distance up to 2 km.
. DIN rail and panel mount support.

Fiber Converter Software Features:

. Auto directional flow control on RS-485.
. Automatically switch signaling RS-232, RS-422 and RS-485.
. Automatic baud rate switching from 300 baud to 115.2 Kbps.
Replaces Garrettcom - DYMEC 3350 Converters

The DYME C37 Ethernet to Serial Converter Package Includes:
DYMEC C37 Ethernet to RS 232 / RS 422 / RS 485 Converter.

Untitled-1

Product Data Sheet 

Product Sheet

REPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol, Ruggedcom, Belden, cisco