Menu
Cart 0

DYMEC DY-H8042F-60W, 6 Port, Gigabit, PoE++(60 Watt), Industrial Ethernet Media Converter, 4 X 10/100/1000Base(T)X PSE & 2 X 100/1000BaseX SFP Slots , Rugged, Temperature Hardened, Military Grade, Class 1 Div 2

  • $237.25
  • Save $207


DYMEC DY-H8042F-60W - 6 Port, Un-Managed, 4 Port: 60 Watt PSE, PoE+, Gigabit, Industrial Ethernet Media Converter with Dual gigabit SFP Uplinks

  • Unmanaged, "Plug and Play" installation for quick setup and deployment
  • Designed with Hardened MARVELL IC
  • Class 1 Div 2 - Hazardous Location (HazLoc)
  • Heat Reduction Technology
  • Four (4) Gigabit IEEE 802.3af/at PoE+ / 60 Watt PSE Port / RJ-45
  • Two (2) Gigabit 100/1000BaseX - SFP Slots
  • 9 KB jumbo frame support with wire speed performance
  • User configurable multi-event alarm relay
  • Rugged industrial design with IP 30 Military Grade Casing
  • IP 40 rugged military grade housing
  • -40°C to 85°C Temperature Hardened -  for deployment in harsh environments
  • Limited Lifetime Warranty

Surge Protection on ALL Data Ports and Power Inputs
Ideal for IP surveillance, cameras, rail, ITS,  transit, traffic, mining, sensors and other demanding PoE+  and high wattage applications

The DYMEC DY-H8042F-60W is a 6 Port industrial Ethernet 802.3af/at PoE Plus (up to 60 Watts) switch designed for the integration of mission-critical PoE devices in IP security, access control, in-vehicle, SCADA, sensor networks and intelligent transportation systems. (ITS)

The switch features four (4) Gigabit speed, 10/100/100Base(T)X high-power 802.3af/at PSE port (Up to 60 Watts), and two (2) Gigabit 100/1000BaseX SFP Slots  The PoE+ delivers a full 60 Watts of 48 Volt DC power, to each of the four (4) PoE+ PSE ports. This maximizes the PD power delivery to devices such as PTZ cameras, wireless radios, heaters and sensors.

A compact, DIN rail mount housing, extended operating temperature, and wide 48 ~ 56 Volts DC input voltage range enable the switch to satisfy the widest variety of PoE & PoE+ integration requirements.

6 Port, UnManaged, PoE+, Gigabit, Class 1 Division 2 - with 4 X 10/100/1000 Mbps TX (RJ-45) PSE Ports  (Up to 60 Watts) & 2 X 100/1000 Mbps SFP Slots  /// Input Voltage: 48 ~ 56 Volts DC (Removable Terminal Block)

UPOE Compliant

DYMEC is a Veteran Owned Small Business

Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC

 * DYMEC - "American Industrial" Specifications

IEEE Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3at
IEEE 802.3u, IEEE 802.3z
IEEE 802.3x, IEEE 802.3af
Back Plane 15 Gbps, Non-blocking Switching Fabric
Operating Temperature -40° ~ 85° C
Storage Temperature -40° ~ 85° C
Humidity 5% ~ 97% non-condensing
Dimensions IP-40, Military Grade, 103.5 x 32 x 81.5 mm (L x W x  D)
EMI FCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4
Safety UL/cUL Class I, Division 2
IEC-EN60950-1
Protocols CSMA/CD
Shock IEC 60068-2-27 / EN 50155
Free Fall IEC 60068-2-32 / EN 50155
Vibration IEC 60068-2-6 / EN 50155
Ethernet Ports

4 x 10/1001000Base(T)X RJ-45 60 Watt PSE 

2 x 100/1000BaseX SFP Slots

Mac Address Table 4 K MAC Address Table
Warranty Limited Lifetime
Buffer 1 M
Method Store and Forward
DIP Switch

To select 2 pair (30/36 Watts) or 4 pair (60/72 Watts)

To select Mode A, or Mode B

To select standard IEEE 802.3at 30 Watts or High Power POE+ 36 Watts

Transfer Rate

14,880 PPS for Ethernet Port
148,800 PPS for Fast Ethernet Port                                                                       1,488,000 PPS for Gigabit Port

Power Input 48 ~ 56 Volts DC, Dual Inputs,  Surge Protected 
Fault Output 1 Relay Output / 1 A @ 24 Volts DC
Power Consumption 2 Watts @ 48 Volts DC at Full Load (Without PoE)
Power Redundancy Yes  - Dual Input, Surge Protected

 

MTBF - Mean Time Between Failure 510,507 Hours
MIL-HDBK-217F @ 25 Degrees Centigrade
Class 1 Division 2, Military Grade
Housing Military Grade, IP 40
UL Class 1 Division 2, Hazardous Locations (HazLoc)
Network Connector

1 x RJ-45 10/100/1000BaseT(X) - RJ-45, 60 Watt PSE with POE+ Output power - up to 60 Watts and 1 x 10/100/1000 Mbps TX, RJ-45 

LED

PW1(power 1) Green: ON- power good, OFF-power failed

PW2(power 2) Green: ON- power good, OFF-power failed

Mode A : ON-  End Span PD detected

Mode B: ON – Mid Span PD detected

4 Pair: ON – 60W PSE in active mode.

            OFF – 30W PSE in active mode.

PoE Pin Assignment

Default: Mode A (End Span)  V+, V+, V-, V- for pin 1, 2, 3, 6

DIP switch setting can be changed to Mode B, V+, V+, V-, V- for pin 4, 5, 7, 8

Overload Current &

Reserve Polarity

Protection

Yes
Alarm Relay Contact Capacity / 1 A @ 24 Volts DC
EMC / EMS CE, FCC, VCCI
Safety IEC 60950-1
EN50121-4 Railway Applications / Electromagnetic Compatibility
EN50121-3-2 Railway Applications / Electromagnetic Compatibility
EN55011 Industrial Scientific and Medical (ISM) Equipment
EN50155 Railway Applications - Electronic Equipment
EN55022 / 24 ITE Equipment
Installation / Mounting Din-Rail / Shelf Mount (Din-Rail Brackets Included)
Size Type Small Form Factor
Removable Terminal Block 4 Pin -  Dual Power Inputs 
PoE+ Power Maximum total power 240 Watts at 56 Volts DC power input. (IEEE 802.3af/at)
American Certified Ethernet Yes
American Design & Engineering Yes
NEC Code / HazLoc NEC500, NEC505 / IEC 60079-10
Port Speeds / Temperature Hardened Full Line Rate - Non-blocking / Yes
REPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol, Cisco, Belden, Ruggedcom

 

Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC

Untitled-1