DYMEC DY-HI8011-95W, 2 Port, Gigabit, PoE++(60 & 95 Watt), Industrial Ethernet Media Converter, 1 x 10/100/1000Base(T)X PSE & 1 x 10/100/1000Base(T)X , Rugged, Temperature Hardened, Military Grade, Class 1 Div 2
DYMEC DY-HI8011-95W - 2 Port, Un-Managed, 60 & 95 Watt PSE, PoE+, Gigabit, Industrial Ethernet Media Converter
- Unmanaged, "Plug and Play" installation for quick setup and deployment
- Designed with Hardened MARVELL IC
- Class 1 Div 2 - Hazardous Location (HazLoc)
- Heat Reduction Technology
- One (1) Gigabit IEEE 802.3af/at PoE+ / 60 & 95 Watt PSE Port / RJ-45
- One (1) Gigabit 10/100/1000Base(T)X - RJ-45
- 9 KB jumbo frame support with wire speed performance
- User configurable multi-event alarm relay
- Rugged industrial design with IP 30 Military Grade Casing
- IP 30 rugged military grade housing
- -40°C to 75°C Temperature Hardened - for deployment in harsh environments
- Limited Lifetime Warranty
Surge Protection on ALL Data Ports and Power Inputs
Ideal for IP surveillance, cameras, rail, ITS, transit, traffic, mining, sensors and other demanding PoE+ and high wattage applications
The DYMEC DY-H18011-95W is a 2 Port industrial Ethernet 802.3af/at PoE Plus (up to 60 & 95 Watts) switch designed for the integration of mission-critical PoE devices in IP security, access control, in-vehicle, SCADA, sensor networks and intelligent transportation systems. (ITS)
The switch features one (1) Gigabit speed, 10/100/100Base(T)X high-power 802.3af/at PSE port (Up to 60 & 95 Watts), and a Gigabit 10/100/1000Base(T)X port. The PoE+ delivers a full 60 or 95 Watts of 48 Volt DC power, across the one (1) PoE+ PSE port (4 Pairs). This maximizes the PD power delivery to devices such as PTZ cameras, wireless radios, heaters and sensors.
A compact, DIN rail mount housing, extended operating temperature, and wide 48 ~ 57 Volts DC input voltage range enable the switch to satisfy the widest variety of PoE & PoE+ integration requirements.
2 Port, UnManaged, PoE+, Gigabit, Class 1 Division 2 - with 1 X 10/100/1000 Mbps TX (RJ-45) PSE Ports (Up to 60 & 95 Watts) & 1 X 10/100/1000 Mbps TX (RJ-45) Port /// Input Voltage: 48 ~ 56 Volts DC (Removable Terminal Block)
UPOE Compliant
DYMEC is a Veteran Owned Small Business
Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC
* DYMEC - "American Industrial" Specifications
| IEEE Standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at IEEE 802.3u, IEEE 802.3z IEEE 802.3x, IEEE 802.3af |
| Back Plane | 5 Gbps, Non-blocking Switching Fabric |
| Operating Temperature | -40° ~ 75° C |
| Storage Temperature | -40° ~ 85° C |
| Humidity | 5% ~ 97% non-condensing |
| Dimensions | IP-30, Military Grade, 103.5 x 32 x 81.5 mm (L x W x D) |
| EMI | FCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4 |
| Safety | UL/cUL Class I, Division 2 IEC-EN60950-1 |
| Protocols | CSMA/CD |
| Shock | IEC 60068-2-27 / EN 50155 |
| Free Fall | IEC 60068-2-32 / EN 50155 |
| Vibration | IEC 60068-2-6 / EN 50155 |
| Ethernet Ports | 1 x 10/1001000Base(T)X RJ-45 60 Watt PSE & 1 x 10/100/1000Base(T)X RJ-45 Port |
| Mac Address Table | 2 K MAC Address Table |
| Warranty | Limited Lifetime |
| Buffer | 1 M |
| Method | Store and Forward |
|
|
|
| Transfer Rate |
14,880 PPS for Ethernet Port |
| Power Input | 48 ~ 57 Volts DC, Dual Inputs, Surge Protected |
| Fault Output | 1 Relay Output / 1 A @ 24 Volts DC |
| Power Consumption | 1 Watts @ 48 Volts DC at Full Load (Without PoE) |
| Power Redundancy | Yes - Dual Input, Surge Protected |
| MTBF - Mean Time Between Failure | 510,507 Hours MIL-HDBK-217F @ 25 Degrees Centigrade Class 1 Division 2, Military Grade |
| Housing | Military Grade, IP 30 |
| UL | Class 1 Division 2, Hazardous Locations (HazLoc) |
| Network Connector |
1 x RJ-45 10/100/1000BaseT(X) - RJ-45, 60 Watt PSE with POE+ Output power - up to 60 Watts and 1 x 10/100/1000 Mbps TX, RJ-45 |
| LED |
PW1(power 1) Green: ON- power good, OFF-power failed PW2(power 2) Green: ON- power good, OFF-power failed . |
| PoE Pin Assignment |
Default: Mode A (End Span) V+, V+, V-, V- for pin 1, 2, 3, 6 |
|
Overload Current & Reserve Polarity Protection |
Yes |
| Alarm Relay Contact | Capacity / 1 A @ 24 Volts DC |
| EMC / EMS | CE, FCC, VCCI |
| Safety | IEC 60950-1 |
| EN50121-4 | Railway Applications / Electromagnetic Compatibility |
| EN50121-3-2 | Railway Applications / Electromagnetic Compatibility |
| EN55011 | Industrial Scientific and Medical (ISM) Equipment |
| EN50155 | Railway Applications - Electronic Equipment |
| EN55022 / 24 | ITE Equipment |
| Installation / Mounting | Din-Rail / Shelf Mount (Din-Rail Brackets Included) |
| Size Type | Small Form Factor |
| Removable Terminal Block | 4 Pin - Dual Power Inputs |
| PoE+ Power | Maximum total power 95 Watts at 56 Volts DC power input. (IEEE 802.3af/at) |
| American Certified Ethernet | Yes |
| American Design & Engineering | Yes |
| NEC Code / HazLoc | NEC500, NEC505 / IEC 60079-10 |
| Port Speeds / Temperature Hardened | Full Line Rate - Non-blocking / Yes |
REPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol, Cisco, Belden, Ruggedcom
Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC
