Menu
Cart 0

DYMEC DY-7041SC-30 - 5 Port, PoE+, 30 Watt, Un-Managed, Long Range, Industrial Fast Ethernet Switch, SCADA, - with 4 X 10/100 Mbps TX Ports & 1 X 10/100 SC (20 KM Single-Mode) Fiber , Din-Rail or Shelf Mount

  • $99.00
  • Save $163


DYMEC DY-7041SC-30, 5 Port, PoE+, Un-Managed, SCADA, Industrial Fast Ethernet Switch - Single-mode Fiber

Power over Ethernet Plus (30 Watt)  - with No Power Budget Required

IEEE 802.3 af/at Compatible

  • 5 Port, PoE+, 30 Watt Un-Managed, 10/100 Industrial Fast Ethernet Switch for SCADA:
  • Fast Ethernet PoE+, 30 Watt Media Converter
  • Long Range Ethernet 100 Mbps@150 Meters / 10 Mbps@250 Meters 
  • 4 X 10/100 Mbps TX PSE Ports & 1 X 10/100 SC (30 KM Single-Mode)
  • Input Voltage: 44 ~ 56 Volts DC (Removable Terminal Block) Military Grade
  • Class 1 Division 2, Hazardous Area / HazLoc
  • Dual Power Input - Surge Protected
  • UL, cUL, CE, RoHS, FCC, NEMA TS-2
  • Flow control on Full Duplex
  • All Data Ports Surge Protected
  • Limited Lifetime Warranty

DYMEC DY-7041SC-30 -  A Wide Temperature, Power Over Ethernet, 30 Watt, Military Grade Industrial Ethernet Switch is a leading low price solution for all harsh environment, automation, SCADA or industrial networking projects. This Fast Ethernet 5 port PoE+switch supports 10/100 Mbps Auto-Negotiation and has a wide DC power input design (44 – 56 Volts DC) to allow for all types of applications such as camera or panel designs. The Switch has a wide operating temperature of -40º C to 85º C. Every port on the switch has two LED lights to easily indicate link status, activity and transmission speed. All data ports are fully surge protected and the dual input power supply is protected as well.This rugged Ethernet switch  supports the Auto MDI/MDI-X function. It is a UL Class 1, Division 2, Military Grade product certified for oil and gas applications. This Class 1 Div 2, Military Grade product and is packaged in a  a slim and compact size, encased in a rugged, structural IP-30 casing that is DIN-RAIL (included) or SHELF MOUNT ready for industrial & SCADA applications. No Power Buget required - UP to 30 Watts on all 4 PSE Ports ( IEEE 802.3 af/at Compatible) Camera Ready!

DYMEC is a Veteran Owned Small Business

Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC

 * DYMEC - "American Industrial" Specifications

IEEE IEEE 802.3, IEEE 802.3z, IEEE 802.3at
IEEE 802.3u, IEEE 802.3ab
IEEE 802.3x, IEEE 802.3af
Back Plane 16.0 Gbps, Non-blocking Fabric
Operating Temperature -40° ~ 85° C
Storage Temperature -40° ~ 85° C
Humidity 5% ~ 97% non-condensing
Dimensions IP-30, Military Grade, 142 x 36.2 x 105 mm (L x W x  D)
EMI FCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4
Safety UL/cUL Class I, Division 2
CE-EN60950-1
Protocols CSMA/CD
Shock IEC 60068-2-27 / EN 50155
Free Fall IEC 60068-2-32 / EN 50155
Vibration IEC 60068-2-6 / EN 50155
Ethernet Port 4 x 10/100TX RJ-45 PSE & 1 x 10/100Base(X) SC Single-mode, 30 KM
Mac Address Table 1 K MAC Address Table
Warranty Limited Lifetime
Buffer 512 Kb
Method Store and Forward
LED Port: Link/Activity, Full Duplex/Collision
Unit: Power 1, Power 2, Fault
Transfer Rate 14,880 PPS for Ethernet Port,
148,800 PPS for Fast Ethernet Port
Power Input 48 ~ 56 Volts DC, Dual Surge Protected Input
Fault Output 1 Relay Output / 1 A @ 24 Volts DC
Power Consumption 3.76 Watts @ 48 Volts DC at Full Load / without PoE
Power Redundancy Yes  - Dual Input, Surge Protected
R
MTBF - Mean Time Between Failure 510,507 Hours
MIL-HDBK-217F @ 25 Degrees Centigrade
Class 1 Division 2, Military Grade
Housing Military Grade, IP 30
UL Class 1 Division 2
Network Connector

4 x 10/100BaseT(X) RJ-45

1 X 100Base(X) Single-mode, SC, 30 KM

LED

PW 1 (Power 1) Green

PW 2 (Power 2) Green

ERR (Fault) amber

RJ-45 Ports: PSE / 30 Watt

LNK (Link / Active) Green

Flash TX / RX Data Activity

Fiber Port: 

Link (Green)

Activity (Flash)

Reserve Polarity Protection Yes
Overload Current Protection Yes
Alarm Relay Contact Capacity / 1 A @ 24 Volts DC
EMC / EMS CE, FCC, VCCI
Safety IEC 60950-1
EN50121-4 Railway Applications / Electromagnetic Compatibility
EN50121-3-2 Railway Applications / Electromagnetic Compatibility
EN55011 Industrial Scientific and Medical (ISM) Equipment
EN50155 Railway Applications - Electronic Equipment
EN55022 / 24 ITE Equipment
Installation / Mounting Din-Rail / Shelf Mount (Din-Rail Brackets Included)
Size Type Small Form Factor
Removable Terminal Block 6 Pin - 2 Redundant Power / 1 Alarm Relay Contact
Transfer Rate 14,880 PPS for Ethernet Port
148,800 PPS for Fast Ethernet Port
American Certified Ethernet Yes
American Design & Engineering Yes
NEC Code / HazLoc NEC500, NEC505 / IEC 60079-10
Port Speeds / Temperature Hardened Full Line Rate - Non-blocking / Yes
Untitled-1EPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol