DYMEC DY-HCS8011SFP-60W, 2 Port, Gigabit, PoE++(60 Watt), Industrial Ethernet Media Converter, 1 X 10/100/1000 TX PSE & 1 X 100/1000 Base(X) SFP Slot, Rugged, Temperature Hardened, Military Grade, Class 1 Div 2
DYMEC DY-HCS8011SFP-60W - 2 Port, Un-Managed, 60 Watt PSE, PoE+, Gigabit, SFP, Industrial Ethernet Switch
- Unmanaged, "Plug and Play" installation for quick setup and deployment
- Designed with the Hardened MARVELL IC Chipset
- Class 1 Div 2, Hazardous Location (HazLoc)
- Heat Reduction Technology
- One (1) Gigabit IEEE 802.3af/at PoE+ / 60 Watt PSE Port
- One (1) Gigabit 100/1000 SFP Slot
- 9 KB jumbo frame support with wire speed performance
- User configurable multi-event alarm relay
- Rugged industrial design with IP 30 Military Grade Casing
- IP 30 rugged military grade housing
- -40°C to 85°C Temperature Hardened - for deployment in harsh environments
- Limited Lifetime Warranty
Surge Protection on ALL Data Ports and Power Inputs
Ideal for IP surveillance, cameras, rail, ITS, transit, traffic, mining, sensors and other demanding PoE+ and high wattage applications
The DYMEC DY-HCS8011SFP-60W is a 2 Port industrial Ethernet 802.3af/at PoE Plus (up to 60 Watts) switch designed for the integration of mission-critical PoE devices in IP security, access control, in-vehicle, SCADA and intelligent transportation systems. (ITS)
The switch features one (1) Gigabit speed, high-power 802.3af/at PSE port (Up to 60 Watts), and a Gigabit SFP Slot fiber port. The PoE+ delivers a full 60 Watts of 48 Volt DC power, across the one (1) PoE+ PSE port. This maximizes the PD power delivery to devices such as PTZ cameras, wireless radios, heaters and sensors.
A compact, DIN rail mount housing, extended operating temperature, and wide 48 ~ 56 Volts DC input voltage range enable the switch to satisfy the widest variety of PoE & PoE+ integration requirements.
2 Port, UnManaged, PoE+, Gigabit, Class 1 Division 2 - with 1 X 10/100/1000 Mbps TX PSE Ports (Up to 60 Watts) & 1 X 10/100/1000 SFP Slot Port /// Input Voltage: 48 ~ 56 Volts DC (Removable Terminal Block)
UPOE Compliant
DYMEC is a Veteran Owned Small Business
Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC
* DYMEC - "American Industrial" Specifications
IEEE Standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at IEEE 802.3u, IEEE 802.3z IEEE 802.3x, IEEE 802.3af |
Back Plane | 5 Gbps, Non-blocking Switching Fabric |
Operating Temperature | -40° ~ 85° C |
Storage Temperature | -40° ~ 85° C |
Humidity | 5% ~ 97% non-condensing |
Dimensions | IP-30, Military Grade, 142 x 43 x 105 mm (L x W x D) |
EMI | FCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4 |
Safety | UL/cUL Class I, Division 2 IEC-EN60950-1 |
Protocols | CSMA/CD |
Shock | IEC 60068-2-27 / EN 50155 |
Free Fall | IEC 60068-2-32 / EN 50155 |
Vibration | IEC 60068-2-6 / EN 50155 |
Ethernet Ports | 1 x 10/1001000Base(T)X RJ-45 60 Watt PSE & 1 x 100/1000Base(X) / SFP Slot Port |
Mac Address Table | 2 K MAC Address Table |
Warranty | Limited Lifetime |
Buffer | 1 M |
Method | Store and Forward |
DIP Switch |
To select SFP speed 100 Mbps or 1000 Mbps |
Transfer Rate |
14,880 PPS for Ethernet Port |
Power Input | 48 ~ 56 Volts DC, Dual Inputs, Surge Protected |
Fault Output | 1 Relay Output / 1 A @ 24 Volts DC |
Power Consumption | 2 Watts @ 48 Volts DC at Full Load (Without PoE) |
Power Redundancy | Yes - Dual Input, Surge Protected |
MTBF - Mean Time Between Failure | 510,507 Hours MIL-HDBK-217F @ 25 Degrees Centigrade Class 1 Division 2, Military Grade |
Housing | Military Grade, IP 30 |
UL | Class 1 Division 2, Hazardous Locations (HazLoc) |
Network Connector |
1 x RJ-45 10/100/1000BaseT(X) 60 Watt PSE with POE+ Output power up to 60 Watts and 1 x 100/1000M SFP Slot |
LED |
PW 1 (Power 1) Green PW 2 (Power 2) Green ERR (Fault) amber RJ-45 Ports: LNK (Link / Active) Green Flash TX / RX Data Activity Fiber Port: Link (Green) - SFP Detected Activity (Flash) |
PoE Pin Assignment |
60 watts 4 pairs V+, V+, V-, V- for pin 1, 2, 3, 6 V+, V+, V-, V- for pin 4, 5, 7, 8 |
Overload Current & Reserve Polarity Protection |
Yes |
Alarm Relay Contact | Capacity / 1 A @ 24 Volts DC |
EMC / EMS | CE, FCC, VCCI |
Safety | IEC 60950-1 |
EN50121-4 | Railway Applications / Electromagnetic Compatibility |
EN50121-3-2 | Railway Applications / Electromagnetic Compatibility |
EN55011 | Industrial Scientific and Medical (ISM) Equipment |
EN50155 | Railway Applications - Electronic Equipment |
EN55022 / 24 | ITE Equipment |
Installation / Mounting | Din-Rail / Shelf Mount (Din-Rail Brackets Included) |
Size Type | Small Form Factor |
Removable Terminal Block | 4 Pin - Power / Alarm Relay Contact |
PoE+ Power | Maximum total power 72 Watts at 56 Volts DC power input. (IEEE 802.3af/at) |
American Certified Ethernet | Yes |
American Design & Engineering | Yes |
NEC Code / HazLoc | NEC500, NEC505 / IEC 60079-10 |
Port Speeds / Temperature Hardened | Full Line Rate - Non-blocking / Yes |
REPLACES KYLAND, GARRETTCOM, KYLAND Technology, KYLAND-USA, Transition Networks, Antaira, Comtrol, Cisco, Belden, Ruggedcom
Optional SFP: Multi-Mode or Single-Mode, Any Distance
Limited Lifetime Warranty, American Certified Ethernet, NEMA TS-2, IEEE, IEC, TUV, CE, FCC